Riser Kit for Impress

The Riser Kit extends the height of the Impress so you can core longer beads. The riser blocks mount between the Impress legs and the base to increase height. The Impress will core beads about 5/8 inch (about 16 mm) length from hole to hole. One Riser Kit extends this range up to 1 inch (25 mm) to over 40 mm. Each set includes two 1/4 inch (6.35 mm) and two 3/4 inch (19 mm) blocks with offset holes that match the mounting hole locations in the legs of the Impress, and all screws needed for any configuration. You can add another riser set, for even longer capacity.