Centering Pegs

$6.00

SKU: N/A Category:

Description

These screw into the bottom post of the Impress Bead Liner to center your tubing in the tool. You will need a centering peg for each size of tubing you will be using.

The pegs are sized according to the tubing ID (Inside Diameter.)  Most every common size is listed here, but if you don’t see your size, click the customer service link to send an email and request that size. There is no extra charge for a custom peg.

NOTE: For  3/32, 1/8, and 5/32 mandrel beads , you’ll need a Flaring Die Peg, instead of a regular centering peg (click that product to see them.)

Additional information

Weight 0.1 oz
Dimensions 0.25 × 0.1 × 0.1 in
Peg Size (Tubing ID)

4.37 mm ID(.172 inch ID) Default size, Fits Pandora, 5.54 mm ID (.218 inch ID) This is 1/4 inch OD tube., 5.5 mm ID (.216 inch id), 5.1 mm ID (.201 inch ID), 5.0 mm ID (.197 inch ID), 4.6 mm ID (.181 inch ID), 4.2 mm ID (.165 inch ID), 4.1 mm ID (.162 inch ID), 4.0 mm ID (.156 inch ID), 3.8 mm ID (.150 inch ID)